TSM1330C User's Manual
Page 10
Revision 1.0
2.4.1 LAN Connection
There is one external RJ-45 LAN connector (a second RJ-45 connector is plugged at the factory and
should not be used). The RJ-45 connector enables connection to an external network. To connect a
LAN cable with an RJ-45 connector, please follow the instructions below.
Step 1:
Locate an RJ-45 connector
on the bottom panel of the TSM1330C.
Step 2:
Align the connector.
Align the RJ-45 connector on the LAN cable with the RJ-45 connector on
the bottom panel of the TSM1330C. See Figure 6.
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45
connector into the onboard RJ-45 connector.
Figure 5 - TSM1330C Rear Panel
NMEA 2000
®
Connectors