Revision 1.0
Page 17
Figure 13
– Configuration Dialog, Network Tab
e.
Uncheck the “
Use DHCP
” box to indicate that your LAN does not use DHCP.
f.
Optionally, in the “Hostname” field, enter a hostname for the TSM1330C. This is used by the
network router.
g.
In the “
IP Address
” field, enter the IP address you wish to assign to the TSM1330C.
h.
In the “
Subnet M
ask”
field, enter the netmask value used on your LAN (in most cases, this
value will be “255.255.255.0”).
i.
In the “Default
Gateway
”
field, enter the IP address of the default gateway of your LAN.
j.
In the “
Default DNS
”
field, enter the IP address of a DNS (Dynamic Name Service) Server
used on your LAN.
k.
Click the “
Update
” button to make these changes permanent. The screen will go blank for a
few seconds while this is being done.