TLA100 User’s Manual
Page 4
Revision 1.2
Figure 2 – Mounting Location When Used Without Analog Gauge
2.3 Connecting the TLA100
There are two connection points (see Figure 3) for the TLA100: 1) the permanently attached
gray cable for connection to analog gauge or tank sender, and 2) the NMEA 2000
®
connection.
Refer to Section 2.3.1 for making the gauge or tank sender connection and Section 2.3.2 for
making NMEA 2000
®
connection.
Caution: Connect the TLA100’s permanently attached gray cable to the gauge or tank
sender before making the connection to the NMEA 2000
®
network as this reduces the
risk of a stray spark when working around fuel tanks.
Figure 3 – TLA100 Connections
NMEA 2000
Connector
Gray
Cable
www.busse-yachtshop.de | [email protected]
