MBB300C User's Manual
Page 4
Revision 1.0
2 Installation
2.1
Unpacking the Box
When unpacking the box containing the Maretron MBB300C, you should find the following items:
1
– MBB300C Maretron Vessel Monitoring and Control Black Box
1
– 3-Pin Power Connector
1
– USB Flash Drive Containing System Documentation
1
– Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2
Choosing a Mounting Location
The MBB300C must be mounted in an indoor location.
2.3
Mounting the MBB300C
The MBB300C can be mounted to a wall or other flat surface.
2.3.1 Mounting the System
To mount the MBB300C onto a wall or some other surface, please follow the steps below.
Step 1:
Turn the MBB300C over.
Step 2:
Drill holes in the intended installation surface.
Step 3:
Align the mounting holes in the sides of the MBB300C with the predrilled holes in the
mounting surface.
Step 4:
Insert four retention screws, two on each side, to secure the MBB300C to the wall.
