MBB300C User's Manual
Page 12
Revision 1.0
Figure 11
– Configuration Dialog
e.
Uncheck the
“DHCP
” box to indicate that your LAN does not use DHCP.
f.
In the “
IP Address
” field, enter the IP address you wish to assign to the MBB300C.
g
Click on the “
Configuration”
button in the Commands & Settings window to display the
Configuration dialog.
h.
In the “
Subnet M
ask”
field, enter the subnet mask value used on your LAN (in most cases,
this value will be “255.255.255.0”).
i.
In the “
Default Gateway
”
field, enter the IP address of the default gateway of your LAN.
j.
In the “
Default DNS
”
field, enter the IP address of a DNS (Dynamic Name Service) Server
used on your LAN.
k.
Click the “
Update
” button to make these changes permanent. The screen will go blank for a
few seconds while this is being done.
