DCM100 User’s Manual
Page
2
Revision
1.0
2 Installation
2.1 Unpacking the Box
When unpacking the box containing the Maretron DCM100, you should find the following
items:
1 – DCM100 – DC Monitor
1 – DC Current Sensor with 5 ft. long cable (Part # LEMHTA200-S) (outer cable covering grey)
1 – Battery Temperature Sensor with 5 ft. long cable (Part # TR3K) (outer cable covering grey)
1 – Battery Voltage Sense Cable, 5 ft. long (Part # FC01) (outer cable covering white )
1 – Power Cable, 5 ft. long (Part # FC01) (outer cable covering white)
1 – Parts Bag containing 4 Stainless Steel Mounting Screws
1 – DCM100 User’s Manual
1 – Warranty Registration Card
If any of these items are missing or damaged, please contact Maretron.
2.2 Choosing a Mounting Location
The DCM100 should be mounted near the monitored source of DC power. Please consider the
following when choosing a mounting location.
1. The DCM100 is waterproof, so it can be mounted in a damp or dry location.
2. The orientation is not important, so the DCM100 can be mounted on a horizontal deck,
vertical bulkhead, or even upside down if desired.
3. The DCM100 is temperature rated to 55°C (130°F), so it should be mounted away from
engines or engine rooms where the operating temperature exceeds the specified limit.
