Marengo Fabricated Steel TankOptix FLEX, Руководство пользователя и инструкция по установке

Страница: 5 / 11

4
TANKOPTIX FLEX - REV 1.2
Control Panel (MFS200-D)
Quick Connects
ANTENNA
Connect the
antenna.
cable SENSOR 1
Connect
the cable
labeled
“Sensor
Cable” to
sensor 1. SENSOR 2
Connect
the cable
labeled
“Sensor
Cable” to
sensor 2. DISPLAY
Connect the
cable
labeled
“Flex
Display
Cable” to
display. POWER
Connect to
supplied
power cable.
3-Sensor Configuration: If the system is utilizing three sensors, a Y quick-connect splitter will
be included. The Y quick-connect splitter connects to the SENSOR 2 terminal of the panel and
splits the single connection for two sensors. Follow the diagram included with Y quick-connect
splitter for installation.
4-Sensor Configuration: If the system is utilizing 4 sensors please utilize the DISPLAY
connection of the panel for sensor 4. A local display is not possible when utilizing 4 sensors.
TankOptix Cloud reporting is required in this application.
Making the Connection
1. Ensure connection of the device with the proper cable! All cables and connectors
should be labeled accordingly.
2. Find the index of the quick connect cable/connector.
3. Once the cable and connector have been mated, tighten down the locking screw.
4. It is important to make sure the quick-connect cables are fully tightened to ensure a
proper seal. Only hand tighten the connections. DO NOT USE A WRENCH.