background image

2

Mareli Systems

• 

“Mareli Systems” expresses its gratitude towards the clients who purchased the manufactured products.

• 

“Mareli Systems” provides the present manual as an aid to the team, which will install, adjust and main-

tain the device, as well as to the client which will exploit it.

• 

“Mareli Systems” requires that the technicians who will carry out the above mentioned procedures have 

passed a training course on the activities, associated with this product.

ATTENTION! For Your safety, it’s necessary to read carefully this manual as well as the exploitation and instal-

lation manual of the automated pellet burner before attempting any installation, adjustment and exploitation 

activities. Also read the installation and exploitation manual of the pellet bunker if the device is provided with 

one.  The non-fulfillment of prescriptions and violation of active regulations and directives may lead to damage 

and unexpected consequences for which “Mareli Systems” accepts no responsibility.

 

 Do not discharge into garbage container!!!

           This sign on the burner means that the product must be disposed of only in an a specially designated for 

that purpose space for the collection and recycling of waste. Disposal of this device falls under the regulation 

of the Directive on waste of electrical and electronic equipment (EEE) of the European Union. Dear custom-

ers, let us contribute to the preservation of the environment!
• 

This appliance is not intended for use by persons (including children) with limited physical, sensory or 

mental abilities or lack of experience and knowledge. The installation must be performed by a qualified 

expert in the field of heating installations or authorized by “Marelli Systems’ service. The place and way 

of connecting the stove should be selected carefully in accord with the safety instructions. Install away 

from flammable objects!

• 

Never try to make changes to the torch! It is forbidden to use flammable liquids for ignition! Servicing 

the burner decorating your done by an adult who is familiar with the operating conditions!

• 

Introduction of inflammable liquids in  room with a working burner is strictly prohibited!

• 

Children should not be left unattended in the room where the product is installed!

• 

Safe distances: When installing the product a safe distance of at least 200 mm must be respected. This 

distance applies to the product located near materials of B or C flammability level. The safe distance is 

doubled if the product is close to materials of C3 combustion level.

1. Description and advantages of pellet burner “SMB 35 Kw”

Pellet burners of this series are designed to utilize wood pellets. It has a welded steel construction. The result-

ing heat is absorbed by the heat exchange surface of the boiler body and transmitted the heating system. These 

boilers used for heating in local heating systems, but also for heating domestic water.

Automated pellet burner is part of the system and can utilize the following types of fuel: Wood pellets size 6 

and 8 mm Class A;
The facility comprises: pellet burner equipped with a control panel; 

Advantages of the product:

• 

Designed to utilize pellets, making it cleaner for the environment;

• 

Price of pellets as a local energy source is lesser influenced by world prices of fuel and thus the value of 

the extracted heat is highly competitive in comparison to using conventional heat sources;

• 

Product is highly automated and can be used in systems with programmable room thermostat ensuring 

maximum thermal comfort and fuel economy;

• 

Efficiency;

• 

Low emissions;

• 

Compact design allowing for simple installation and easy maintenance and cleaning;

• 

Opportunity for domestic hot water (DHW);

• 

Minimal operating costs;

Basic information of pellet burner:

• 

The pellet burner is mounted horizontally secured by M8 screws.

• 

The pellet burner is an independent module that can be mounted on already installed boilers making it 

compatible with wood pellets as a fuel source.

• 

The burner is equipped with a control panel.

• 

Wood pellets allow easy automation of the process of combustion and give high efficiency. However, 

the wood pellets and any other solid fuel also live ash, but its amount is less than what remains from 

firewood or coal.

Содержание SMB 35

















Отзывы: