Mareli Systems ECOSTAR AUTO 50, Руководство по сборке и эксплуатации

Страница: 7 / 32

7
Mareli Systems
3. ASSEMBLY
3.1 General conditions.
All national, regional and European requirements for safe operation of the appliance
must be respected during installation and operation.
Prior to installation, load capacity of the place where the boiler will be intended must
be ensured. The weight of the boiler is specified in the technical data table.
To ensure the correct and safe operation of the boiler, the following conditions must
be met:
The installation of the boiler and its accessories must be carried out by authorized per-
sons.
The floor where the boiler is installed should be flat and horizontal, made of fire-resist-
ant materials at least 1500 mm in front of the fireplace and not less than 400 mm on
both sides and at the back of the wall.
Minimum distances from the wall to the boiler should be at least 400 mm. The mini-
mum space in front of the fireplace should be 1500 mm. The minimal distance of the
boiler from combustion materials should be no less than 1500 mm.
The door of the fireplace should be closed tightly during the work process. Opening it
during work is absolutely forbidden.
When installing the boiler, the connections between the individual pipes and the chim-
ney rooftop must be dense.
When the fire is first ignited, a smell occurs as a result of the paint being heated.
The fireplace is painted with heat-resistant paint, which achieves its ultimate resist-
ance after repeated use of the boiler. THEREFORE KEEP OUTSIDE INTERACTIONS
WITH THE COATING TO A MINIMUM in order not to damage it.
A. A neighboring wall.
B. The rear wall.
C. Sidewall.
D. Floor protection.
E. Ignitable element.
1 = 400 (mm)
2 = 600 (mm)
3 = 400 (mm)
4 = 300 (mm)
5 = 1500 (mm)
6 = 120 (mm)
7 = 800 (mm)
A
B
C
D
E
1
2
3
4
5
6
7