www.puretecfitness.com
12
COMPUTER
AUTO START / STOP
When exercise starts, the monitor will automatically turn on and display the progress.
When exercise stops, the monitor will automatically turn off after 5 minutes to save
energy.
Press “MODE” key, will automatically scan Time, Speed, Distance, Calories, and ODO
for every 4 seconds.
The below data will display while pedaling.
Time
Display the elapsed time. Max value is up to 99:59
Speed
Display the current speed in miles per hour.
Distance
Display the distance traveled in Miles. Max value is 99.99 miles.
Calories
Display the calorie consumption in cal.
(ODO) Odometer
Display the accumulation of distance from previous and current
exercises. Max value is 9999 miles.
PULSE
Through the heart rate sensor, measuring the number of beats per
minute.
REPLACE BATTERY:
1. Always purchase the correct size and grade of battery most suitable for the
intended use.
2. Replace all batteries of a set at the same time.
3. Clean the battery contacts and also those of the device prior to battery installation.
4. Ensure the batteries are installed correctly with regard to polarity (+ and -).
5. Remove batteries from equipment when not in use for extended periods of time.
6. Remove used batteries promptly.
7. The Computer requires two 1.5V (AA) batteries. Batteries are not included in
packaging.
8. If the display is not clear or only partial segments appeared, remove the batteries
and wait for 15 seconds before re-install them.
9. The battery life is approx. 3 months under normal usage.
10.
When the batteries are removed, all the functional values will reset to zero.
Note:
Please note all values on this computer are approximate and they are for
comparison purpose only. Do not use these values for any medical or
rehabilitation purpose.
