- -
4
indicator will be on to show the indicator is now under tare operation. A product is placed in the container and it
will show only the weight of the added product. The scale should be tare a second time if another is added to the
first one. Again only the weight added after tare will be displayed.
When the container is removed a negative value will be shown. If the scale was tare just before removing the
container this value is the gross weight of the container plus all products that were removed. The ZERO indicator
will also be on because the platform is back to the same condition it was when the ZERO Key was last pressed.
To clear the tare value, empty the platform and press TARE Key again, TARE indicator will be goes off.
3.5 Parts counting (KEY=1)
Tare the weight of any container that is used, leaving the empty container on the scale. Place samples on the
scale. The number of samples should match the options for parts counting, 10, 20, 50, 100 or 200 pieces.
Weighing sample:
Press MOD Key to begin the parts counting. The scale shows "P 10" asking for a sample
size of 10 parts. Change the sample size by pressing the TARE Key, the display will cycle through the options:
10/20/50/100/200.
Counting:
Press FUN Key when the number matches the sample size. Remove samples from the container
and place the desire parts for counting purpose. Display will show the number of parts (pcs).
Viewing the Unit Weight, Nos. of Counts & Total Weight:
Press FUN Key to cycle through Unit Weight, Nos. of Counts and Total Weight. (Note that the Unit Weight will
show in gram.)
Press MOD Key to return to normal weighing.
3.6 Accumulation (KEY=2)
Accumulate the weight:
When weighing, press FUN Key for accumulation.
Place the products that to be weighed, when the STABLE indicator is on, press MOD Key and the weight value
will be stored in the memory. The display will show nos. of accumulation. After that it goes to normal weight
display. Do other subsequent weighing by the similar procedure as described above. Note: This Indicator can
store 200 Nos. of accumulation.
View the accumulated total weight:
Empty the scale by removing the weights. Press FUN Key it will display the Nos. of weights, and then total
weight.
Clear the accumulated weight from memory:
Press ZERO Key during display of the nos. of weights and total weight, accumulated weights are cleared from
memory.
