3
o
3 panel display
Up to 3 panels can be displayed at once
o
AV access panel
Sd slots
Insert Navionics mapping chips, or micro SD cards, (to download data), and save your
videos and/or pictures to. The micro SD card must be 32 gig or smaller.
USB port
This port will accept a USB mini-micro standard. You can export videos or photos from
the RT-9 to your computer here.
External HDMI port
You can send the signal from your RT-9 to an external monitor (like a big screen TV)
Headphone jack
Plug in your headphones here
Volume Buttons
Push the gray (–) button to lower volume and (+) to raise the volume
o
Module Ports
The module ports are where you
connect your transducer [s] or
camera [s]. Three modules may be
used at once, but only two may be
of the same function. To connect
you will need a flat screwdriver.
o
Power port
The tablet’s internal battery is charged by the power port. To charge, the gold pins from
the docking cradle must be in contact with the power port on the back of the tablet. You
will know you are connected when a lightning bolt displays in the battery icon at the top
of the home page.
o
Docking Cradle
There are two tabs on the front of the docking cradle that the RT-9 will lock into to
charge.
o
Cradle release button
Press the Red button on the back of the RT-9 tablet to release from the docking cradle.
