1900052
REV.6
Page 3
The “power on” light will glow green and the machine will fill to a safe level, above the
elements, before heating.
The “Ready/Status” light will cycle two red flashes while the machine is filling to the safe level.
After this amount of water has heated to about 95ºC the boiler will draw more water in until the
temperature drops by 1 or 2 degrees. The boiler will then heat again. This heat fill cycle
continues until the boiler is full.
Whilst the machine is
above the safe level and filling, the “Ready/Status” light will remain
blank.
The “Ready/Status” light will glow green when the machine is both full and up to normal
operating temperature.
The boiler is now ready for use.
NOTE:
Because the boiler is electronically controlled no priming is necessary.
The element cannot switch on until a safe level of water is reached.
ECO Mode Opera tion (10L mac hines onl y) :
All ECO Boilers use high grade insulation and it is applied to give a significant energy usage
improvement over a standard water boiler.
All under counters
incorporate a ½ tank ‘ECO mode’ function.
To enable the ‘ECO Mode’ press the button located below the ‘Ready’ indicator so that the leaf
symbol illuminates green.
This mode saves energy by minimising the energy wasted during machine down-time.
NOTE: The ECO mode is most effective in installations where the machine has a regular ‘off’
period.
To achieve the most benefit from the energy saving ‘ECO Mode’ on your ECO boiler unit (10L
variants only), the following method should be employed:
o
Towards the end of the boilers operating period for a given day, switch the machine to
ECO Mode. Whilst maintaining water at 95
o
C, the machine tank will slowly drop to half
full, where it will remain.
o
At the end of the machines operating period it should the be turned ‘off’.
o
During the ‘off’ period as there is less water in the tank there will be less energy lost to
the surrounding environment resulting in an energy saving.
To disabl
e simply press the ‘ECO Mode’ button again so that the leaf symbol is not illuminated
Power
Button
Ready/Status
Indicator
Ecomode
Button
