Marco 164 936 15-US - OCK8-E, Инструкция по эксплуатации

Страница: 3 / 16

© S.p.A.
3
· If the “ON/OFF” button is held pushed at power-on until the green led
flashes, the automatic start of the pump is toggled (i.e. if the pump starts
immediately after power on or if it waits an user input before starting).
· If the “TURTLE” button is held pushed at power-on until the blue led flashes,
the enabling of the audible signal at startup is toggled.
· If the “HARE” button is held pushed at power-on until the red led flashes, the
enabling of the external control is toggled. The external control needs a
special cable and has to be requested when the pump order is placed,
otherwise it just keeps the pump always on. The “ON/OFF” and the
“CHANGE DIRECTION” buttons are inhibited, and the red led flashes if
pressed. The long press of both these buttons is not inhibited, therefore their
standard function will keep working.
· By pressing for more than 3 seconds both the “TURTLE” and “HARE” keys
the keyboard lock is enabled, and every button pressed is ignored, also in
case of reboot or power cycle: if a button is pressed, the red led flashes
briefly. To disable it, long press the same keys again.