8
© 2014 S.p.A.
Due to limited weight and dimensions the pump does not require the use of any special
handling or lifting equipment. When handling manually, normal personal protective gear
should be worn (safety shoes with toe piece, etc.)
The pump is carefully packed prior to shipment. Upon receiving, the pump packaging
should be inspected for damages and the pump stored in a dry area.
FLUIDS ALLOWED / NOT ALLOWED
G
TRANSPORTATION AND HANDLING
H
INSTALLATION
I
It is recommended that the use of the pump be according to normative safety
standards and also as per the precautions listed below.
I-1
PACKAGING ENVIRONMENTAL DISPOSAL
I-2
PRELIMINARY CHECKS
Check that there has been no damage to the pump during transportation or storage. Both
inlet and outlet ports should be carefully cleaned removing possible dust or residual
packaging material. Verify that the available electrical power supply corresponds to the
pump specification requirements.
I-3
POSITIONING OF THE PUMP
The pump can be mounted in any position. Fix the pump utilizing suitable screws
corresponding to the antivibration mounts supplied with the pump.
E N G
The user is invited to effect a proper waste separation, in order to facilitate the recycling
of the materials of which the packing is composed; disposal like CER 15.01.01/02
ALLOWED:
FRESH WATER AND SEA WATER
DIESEL FUEL with viscosity between 2 and 5.35 cSt (relative to 37,8°C temperature)
Minimum flashpoint (PM): 55°C.
NOT ALLOWED: RELATED DANGERS
- PETROL (GASOLINE)
- INFLAMMABLE LIQUIDS with PM < 55°C
- LIQUIDS WITH VISCOSITY > 20 cSt
- CORROSIVE CHEMICAL PRODUCTS
- SOLVENTS
- FIRE EXPLOSION
- MOTOR OVERHEATING
- PUMP CORROSION -
INJURY TO PERSONNEL
- FIRE EXPLOSION
- DAMAGE TO SEALS
- FIRE EXPLOSION
- CHEMICAL PRODUCTS
INCOMPATIBLE WITH SEALS.
Max. fluid temperature:
40°C
