Marco 1000201, Инструкция по эксплуатации

Страница: 9 / 28

9
3.4 CO2 INSTALLATION PROCEDURES
There are two CO2 install options with this chiller, either an inbuilt 360-410gr/60L gas cylinder or an external CO2 cylinder.
INTERNAL GAS CYLINDER
Open the side door. Install the CO2 cylinder into the machine. A compatible gas cylinder to use is the Sodastream 60L cylinder
https://sodastream.co.uk/pages/co2-gas-cylinders
EXTERNAL GAS CYLINDER
The machine has an external gas connection for 8mm hose (not provided) in the rear; you must supply appropriate pressure gas
(0.4MPa). Only use super-dry, food grade CO2. Before connecting the pressure reducer to the gas cylinder, always vent any dirt from
the valve. Close the cylinder valve after few seconds.
GAS CYLINDER LOCATION
To prevent the risk of injury or damage the CO2 cylinder must always be kept in a vertical position against a wall, held in place by a
chain and fixed to a bracket. Do not expose the bottle to heat sources or very low temperatures.
PRESSURE REDUCERS
There are different type of CO2 cylinder available. Always use a pressure reducer suitable for the type of valve on the cylinder. If
you use CO2, especially in a small area, ventilate the contaminated area at once.
We advise using a Dual gauge CO2 regulator, Marco part number 1400195. Check for leaks using a solution of
soapy water.
Recommended CO2 Regulator
Marco part number 1400195
To CO2 canister
To Chiller
BS8 connection
8mm push fit
connection
Filter
CO2 Cylinder