1900064
REV.3
Page 3 of 8
Power
Time until first
brew
Time until
tank is full
Recovery rate
5.6kW
39 minutes
50 minutes
0.9 Litres/minute
6kW
36 minutes
47 minutes
1.0 Litres/minute
8.4kW
26 minutes
34 minutes
1.4 Litres/minute
OPERATION:
The Marco Qwikbrew 2 Twin uses the ‘Continuous fill cycle’ as standard.
Continuous Fill Mode (Standard):
Water will be taken in until the machine is full. The heating begins when the quantity of
water is at a safe level above the elements and stops when the machine is full and up to
temperature.
Once the water is up to temperature, the green ‘Ready to Brew’ lights illuminate. A
brew can be selected at this point.
The ‘Continuous fill mode’ essentially keeps the machine full of water, regardless of
temperature. In this mode the machine will never run out of water, but misuse (e.g.
filling buckets for cleaning) can allow cold water to be served. Using hot water at a
faster rate than the machine can recover will result in a temperature drop in the
beverage.
Heat-fill mode (Optional):
This mode of operation is available as an option, but a service agent is required to make
this change.
Tea and coffee is at the optimum temperature when operating under the heat-fill mode.
Water will be taken in until it is a safe level above the elements. At this point the water
stops and heating begins. Once this quantity of water is up to temperature, another small
quantity of cold water is taken in while the heating continues. This heat fill cycle
maintains the correct temperature in the tank.
