Marathon CL030066 Series, Руководство пользователя

Страница: 8 / 12

7
setting mode, then hold the + button (B4) to select the time zone you are in.
There are seven time zones available: Atlantic (AT), Eastern (E), Central (C),
Mountain (M), Pacific (P), Alaska (AK), and Hawaii (H). The icon will be visible
on the display to indicate Daylight Saving Time Mode.
Manual Setting
1. In time display mode, press and hold the MODE button (B1) for three
seconds to enter the Clock/Calendar setting mode.
2. Press the + or - button (B4 or B5) to adjust the setting and press the
MODE button (B1) to confirm each setting. (By pressing and holding the
+ or - button, the process could be accelerated and the desired value
reached faster.)
3. The setting sequence is as follows: 12/24-hour, RCC on/off, Time zone,
Weekday language, Hour, Minute, Second, Year, Month, Date, DST ON/
OFF, Temperature Unit, Alarm sound duration.
4. For day of week and month, there are three languages available for
selection: English, French and Spanish.
Note: All setting modes will automatically exit after 15 seconds if no buttons are pressed.
Alarm sound duration: two options are available, “1 minute” and “2 minutes”.
Seconds can only be adjusted to 0.
If the area can receive the RC-WWVB signal, when both the RCC function and
the DST function are ON, will be visible on the display to indicate daylight
saving time mode.
Alarm and Snooze Functions
1. Press the MODE button (B1) to view the alarm time; ALARM TIME flashes
on the display.
2. When viewing the alarm time, hold the MODE button (B1) for three
seconds to enter the alarm time setting mode.
3. Press the + or - button (B4 or B5) to adjust the alarm time.
4. Press the MODE button (B1) to confirm the setting.
5. Press the ALARM button (B3) to activate or deactivate the alarm. If the
alarm is on, the alarm icon appears on the display.
6. Press the SNOOZE button (B2) when the alarm sounds. The alarm will
pause for approximately five minutes, then it sound again. The
icon flashes on the display during the snooze time. This process can
be repeated seven times.
7. Press any button, except the SNOOZE button (B2), to stop the snooze
function. Otherwise, depending on the setting of the alarm sound
duration, the alarm will be heard for 2 minutes or 1 minute, then it will
stop automatically.
TEMPERATURE
Once powered up, the outdoor remote sensor immediately sends the
temperature RF signal to the main unit. The main unit attempts to search for
the RF temperature signal for five minutes after power up (or after pressing
the RESET button). If the RF signal is received within the first five minutes, the
temperature will appear on the remote temperature display; otherwise it will
be blank (—.-).