5
GETTING STARTED
Thank you for selecting a Marathon clock. To ensure the proper functioning of
the unit, please follow the instructions contained in this manual.
BEFORE SET-UP, PLEASE DO THE FOLLOWING:
1.
Let the clock reach room temperature.
2.
Remove the protective film from the clock.
3.
Insert batteries and wait 10 minutes.
BATTERY INSTALLATION
Main Unit
1. Open the main unit battery compartment cover (C2).
2. Insert 4 x AA size batteries observing polarity (+ and – marks).
3. Replace the main unit battery compartment cover (C2).
Outdoor Remote Sensor
1. Remove screw from the battery compartment (D3) cover located at
back of outdoor remote sensor.
2. Open battery compartment cover and insert 2 x AAA batteries
observing polarity (+ and—marks).
3. Replace battery compartment cover and screw.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) and rechargeable
(nickel-cadmium) batteries.
Replace only with the same or equivalent type of batteries.
Please refer to the battery marks inside the compartment for the correct
polarity (+ and -).
Danger of explosion is possible if batteries are incorrectly replaced.
Do not touch any buttons or settings on the main unit once you have installed the
batteries. The remote temperature and time signal will be received automatically
after the batteries are inserted.
Low Battery Indication
The low battery icon will appear on the display (above the date) to
indicate a low battery status. The batteries should be replaced.
Note: The clock loses its time information when the batteries are removed.
INSTALLATION
Main Unit
The main unit can be placed on a flat surface using the built-in stand (C3) or
mounted on a wall using the wall mount hole (C1) located at the back of the
unit. To mount the unit on a wall, drive a screw that extends about 1/8 inch
from the wall and slide the wall mount hole over this screw to secure it in
place. This clock receives a radio wave signal much like a TV or radio. Be sure
to place it near a window or in another location with good reception.
Outdoor Remote Sensor
The outdoor remote sensor should be securely mounted to a surface using
the wall mount hole (D2) located at the back. It is recommended to place the
outdoor remote sensor in a shaded, dry area to protect it.
Содержание CL030066 Series
Страница 2: ......
