Marathon Power TRTC-2002-N1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 71 / 92

1. Between 55° and 74°C, the unit is de-rated to a maximum load of 1600VA/1200W.
2. De-rate operating temperature above 4900 ft. (1500m) by 5 deg. C per each
additional 1000ft. (300m).
22 Position Terminal Block
Functions A. Provides 6 sets of programmable contacts at pin 1 thru pin 18 for intersection
flash control, Remote Alarms, Pagers or other user interface.
1. “Low Batt”: batteries have reached approximately 40% capacity remaining
2. “On Batt”: unit is in inverter mode
3. “Timer”: unit has been in inverter mode for 2 hours (programmable)
4. “Alarm”: any of the following conditions occur:
a. Line Frequency error
b. Low Output voltage
c. No Temperature Probe
d. Overload
e. No battery connected
f. High temperature
g. Low temperature
5. “Fault”: any of the following conditions occur:
a. Short circuit
b. Batt low voltage
c. Batt high voltage
d. High temperature
e. Overload
B. Provides 48 VDC signal to PTS on pins 21 & 22
C. Provides programmable input contact on pins 19&20.
1. Self-test
2. EXT Alarm
3. EXT Battery Alarm
4. EXT Fan Alarm
5. Door Interlock
Contact Type Form C. Dry contacts rated 1 Amp at 120V
Wiring Uses 14-26 AWG
Communication Specifications
RS-
232/USB/Ethernet
ports
Monitors, controls and calibrates with terminal emulation software for service
personnel to obtain unit diagnostics
RS-232 DB-9, Female, Opto-Isolated, straight-thru cable
USB B-Type receptacle
Ethernet
(optional)
10/100 Mbps Ethernet, auto-detected
Display Panel 2-line LCD
Specifications subject to change without notice. Certain functions require activation.
NOTE:
NOTE:
71