Marathon Power TRTC-2002-N1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 52 / 92

Tabulation of various items that appears under the Line Status, Output Status, Faults and
Alarms are shown in the following tables.
LINE STATUS
Normal Input power is normal.
Buck Input power is out of tolerance. Buck
mode is activated.
Blackout Input voltage is not available.
Low Input voltage is lower than
programmed low limit.
High Input voltage is higher than
programmed Hi limit.
Freq low Input frequency is too low (<55 Hz)
Freq high Input frequency is too high (>65 Hz)
OUTPUT STATUS
Line mode
Inverter mode
Inverter mode. Low bat.
Warning
Boost mode
Buck mode
Hot swap mode
Shutdown due to fault
Shutdown due to low
battery
Shutdown due to no line
FAULT DISPLAYS
Short-Circuit Output Short Circuit
Vout_Hi Output Voltage High
Vbat_Hi Battery Voltage High
Vhat Lo Battery Voltage Low
Temp Hi Ambient Battery Temperature High or
Internal Temperature High
Lout Hi Output Current High
EEPROM_ERROR Error Reading EEPROM
Wout Hi Output Power High (Overload)
Bad Battery Bad Battery
ALARM DISPLAYS
Vout Lo Output Voltage Low
Lout Hi Output Current High
Overload Output Overload
Temp Hi Ambient Battery Temperature High
Pll Ambient Battery Temperature Low
Line Freq Phase Lock Loop Cannot Lock w/ Input
Temp_Probe_Disconnect Temperature probe uninstalled or
disconnected
Batt_Brk_Off The battery breaker is off or the batteries
are discharged
Program Input Alarm The program input contact alarm detected.
Line Status: [Current Status]
Output Status: [Current Status]
Content Status: [Current Status]
Ext. Fan Status: [Current Status]
Faults: [If any, otherwise blank]
Alarms: [If any, otherwise blank]
>_
Line Status Displays
Line Status: [Current Status]
Output Status: [Current Status]
Content Status: [Current Status]
Ext. Fan Status: [Current Status]
Faults: [If any, otherwise blank]
Alarms: [If any, otherwise blank]
>_
Output Status Displays
Line Status: [Current Status]
Output Status: [Current Status]
Content Status: [Current Status]
Ext. Fan Status: [Current Status]
Faults: [If any, otherwise blank]
Alarms: [If any, otherwise blank]
>_
Fault Alarm Displays
52