47
assembly. (Figure 6-74.) Torque the nuts to
4 ft-lb. (5.4 N-M).
Figure 6-74
3. Position the exciter field leads at the left
(9:o’clock) inboard position. Using a
suitable lifting device, mount the exciter
stator on the front e bracket mounting pads
and align the mounting holes. (Figure 6-75.)
Mount the cap screws with Belleville
washers. (Figure 6-72.) Torque t cap screws
to 60 ft-lb. (81 N-M). Route and secure the
exciter stator leads away from any moving
parts.
Figure 6-75
CONDUIT BOX INSTALLATION
1. Install the conduit box over the main
stator leads (be sure the leads are in the
upper compartment and secure with bolts
and lock washers. (Fig 6-76 and 6-77.)
Figure 6-76
Figure 6-77
2. On generators with bus bar assemblies,
reassemble main stator leads and insulating
blocks to bus bars. (Figure 6-78.)
Figure 6-78
