11
ENGLISH
INITIAL SETTING
1.
Connect the supplied AC power cord. (
☞
P.9)
2.
Press the ON button on the remote controller or the
/ I button on the projector.
The ON indicator lights up.
Project an image on the screen roughly at first.
1.
Turn the Zoom ring and adjust to the desired size
within the zoom range.
WIDE: Enlarges (zooms in) the projected image.
TELE: Reduces (zooms out) the projected image.
2.
Turn the Focus ring until the image on the screen
becomes clear.
Zooming and Focusing
C1
C2
S
G1
H1
H2
V
G2
A1
A2
RGB
G3
STD
DYN
G4
THTR
COMP.1
COMP.2
S-VIDEO
USER
HDMI 1
HDMI 2
VIDEO
AUX 1
AUX 2
ON
STANDBY
IRIS
LAMP
C.TEMP
GAMMA
Turning on the Power
You can strictly focus the image with focus pattern.
1.
Press the PATTERN button to project the focus pattern on the screen.
2.
Turn the Focus ring to make an adjustment.
Adjust the focus for the sharpest image possible to obtain, using focus pattern.
3.
Press the PATTERN button again to hide the focus pattern. This completes fine focusing.
Note :
Focus Pattern Color by Lens Shift Position (
☞
P.16)
The focus pattern changes color depending on the lens position. There are two colors and they can
be used for checking the quality of the projected image. The white focus pattern uses the highest
optical performance to maximize the sharpness of the projected image. To enjoy the highest
sharpness, it is recommended to position the lens within this range.
When the lens is shifted outside the aforementioned range, the focus pattern turns green. Rough
focusing in this range looses image sharpness.
Adjusting the zoom position from WIDE to TELE enhances sharpness even at the same lens
position.
INPUT
V-MUTE
ENTER
MENU
ASPECT
FULL
CINEMA
VCR MODE
BLACK LEVEL
PATTERN
BLACK
NOR
ZOOM
THRU
INFO.
I
M
A
Detail Focusing
1.
2.
TELE
WIDE
VP-11S2̲U̲01̲ENG 07.8.27 10:47 AM ページ11
