44
ENGLISH
3.
Each time the tuner finds a station, scanning will pause and the
station will be played for five seconds.
During this time, the following operations are possible.
1) The band can be changed by
TUNER
button .
2) The tuning mode can be changed by
T-MODE
button.
4.
If no button is pressed during this period, the current station is
memorized in location Preset 02
If you wish to skip the current station, rotate the
GYRO TUNING
dial during this period, this station is skipped and auto presetting
continues.
5.
Operation stops automatically when all 50 preset memory
positions are filled or when auto scanning attains the highest
endof all bands. If you desire to stop the auto preset memory at
anytime, press the
CLEAR
button.
MANUAL PRESET MEMORY
(Using the SR9200)
1.
Tune into the radio station you desire (Refer to the
“MANUAL
TUNIN
G” or
“AUTO TUNING”
section).
2.
Press the
MEMO
button on the front panel. “
– –
“ (preset number)
starts blinking on the display.
3.
Select the preset number by rotating the
GYRO TUNING
dial,
while this is still blinking (approx. 5 seconds)
4.
Press the
MEMO
button again to enter. The display stops blinking.
The station is now stored in the specified preset memory location.
(Using the remote control unit)
1.
Tune into the radio station you desire (Refer to the
“MANUAL
TUNING
” or
“AUTO TUNING”
section).
2.
Tap the
MEMO
on the remote unite. “
– –
“ (preset number)starts
blinking on the display.
3.
Enter the desired preset number by tapping ten keypad.
Note:
• When entering a single digit number (2 for example), either
input “02” or just input “2” and wait for a few seconds.
RECALLING A PRESET STATION
(Using the SR9200)
1.
Press the
F/P
button to show the preset station on the display.
2.
Select the desired preset station by turning
GYRO TUNING
knob
on the front panel
(Using the remote control unit)
1.
Tap the
Preset^
or
Preset
v
button to select the desired preset
station, or input your desired preset channel with
ten keypad
on
the remote.
CHECKING THE PRESET STATIONS
The preset broadcast stations can be checked on the on screen
display.
Press
M
button, “Tuner Preset Stations” screen appears on the on
screen display.
Note:
• The device of remote control units need to be
Tuner
.
PRESET SCAN
(Using the remote control unit)
1.
Tap the
Pre scan
on LCD of remote control unit.
“
PRESET SCAN
” appears on the display and then the preset
station with the lowest preset number is recalled first.
2.
Preset stations are recalled in sequence (No.1
→
No.2
→
etc.) for
5 seconds each.
No stored preset number will be skipped.
3.
You can fast forward the preset stations by tapping the
Preset^
continuously.
When the desired preset station is received, cancel the preset
scan operation by tapping the
CLR
or
Pre scan.
CLEARING STORED PRESET STATIONS
You can remove preset stations from memory using the following
procedure.
1.
Recall the preset number to be cleared with the method described
in “Recalling” a preset station.
2.
Press the
MEMO
button on the front panel or tap
Memo
on the remote.
3.
Stored preset number blinks in the display for 5 seconds. While
blinking, press the
CLEAR
button on the front panel or tap
CLR
on
the remote unit.
4.
“
xx CLEAR
” appears on the display to indicate that the specified
preset number has been cleared.
Notes:
• To clear stored all preset stations, press and hold the
CLEAR
and the
F/P
buttons for two seconds.
POWER ON/STANDBY
STANDBY
DO
PHONES
SELECT
ENTER
SELECTOR
7.1CH-IN
LD
DSS
TAPE
CD-R
CD
TV
VCR 1
VCR2/DVD-R
MULTI-SPK
MULTI ROOM
AUX1
S-DIRECT
AUX2
A/D
SLEEP
AUTO-TUNE
GYRO TUNING
DOWN
UP
T-MODE
F/P
AUX1 INPUT
R
AUDIO
L
VIDEO
S-VIDEO
DIGITAL
MEMO
CLEAR
DISPLAY
DVD
TUNER
2.4.
3.
3.
1.
7.1CH-IN
LD
DSS
TAPE
CD-R
CD
TV
VCR 1
VCR2/DVD-R
MULTI-SPK
MULTI ROOM
AUX1
S-DIRECT
AUX2
A/D
SLEEP
AUTO-TUNE
GYRO TUNING
DOWN
UP
T-MODE
F/P
AUX1 INPUT
R
AUDIO
L
VIDEO
S-VIDEO
DIGITAL
MEMO
CLEAR
DISPLAY
DVD
TUNER
2.
1.
1.
3.
1. 3.
POWER ON/STANDBY
STANDBY
DO
PHONES
SELECT
ENTER
SELECTOR
7.1CH-IN
LD
DSS
TAPE
CD-R
CD
TV
VCR 1
VCR2/DVD-R
MULTI-SPK
MULTI ROOM
AUX1
S-DIRECT
AUX2
A/D
SLEEP
AUTO-TUNE
GYRO TUNING
DOWN
UP
T-MODE
F/P
AUX1 INPUT
R
AUDIO
L
VIDEO
S-VIDEO
DIGITAL
MEMO
CLEAR
DISPLAY
DVD
TUNER
3. 2.
2.
3.
3.