FIRMWARE UPDATE PROCEDURE
1. Updating via USB
The latest firmware can be downloaded to a USB memory for updates.
1.1. Connecting to the USB Memory
(1) Preparation
• Use a memory that supports USB2.0.
• USB format : Prepare a USB memory formatted in FAT16 or FAT32.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
• If a USB memory device cannot be updated, replace it with a different USB memory device and perform the update
again.
1.2. Unzipping the Downloaded File
Unzip the downloaded file on your computer.
SR-XXXXXXX
USB_SR-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
The "firmwares" folder is created upon unzipping the file.
Copy that folder to USB flash drive.
The "firmwares" folder must be in the root directly of the USB flash drive (memory).
copy to USB flash drive
77
Содержание SR6010
Страница 8: ...Personal notes 8...
Страница 195: ...2 FL DISPLAY FLD GP1261AI FRONT FLT4400 PIN CONNECTION PATTERN DETAIL 195...