manualshive.com logo in svg

Marantz SR5010, Руководство пользователя

"Marantz SR5010" - высококачественный AV ресивер с поддержкой 4K ultra HD видео и объектных форматов звука. Для полного погружения в мир кино и музыки, скачайте бесплатное Руководство Пользователя с официального сайта производителя. Управляйте звуком на высшем уровне с помощью этого мощного устройства.

Поделиться
Скачать
background image

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;

LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

o

zlib

http://www.zlib.net/
zlib.h -- interface of the “zlib” general purpose compression library version 1.2.3, July

18th, 2005
Copyright (C) 1995 – 2004 Jean-loup Gailly and Mark Adler
This software is provided “as-is”, without any express or implied warranty. In no event

will the authors be held liable for any damages arising from the use of this software.
Permission is granted to anyone to use this software for any purpose, including

commercial applications, and to alter it and redistribute it freely, subject to the

following restrictions:
The origin of this software must not be misrepresented; you must not claim that you

wrote the original software. If you use this software in a product, an acknowledgment

in the product documentation would be appreciated but is not required.
Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.
This notice may not be removed or altered from any source distribution.
Jean-loup Gailly [email protected], Mark Adler [email protected]

o

cURL

http://curl.haxx.se
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 – 2011, Daniel Stenberg, <[email protected]>.
All rights reserved.
Permission to use, copy, modify, and distribute this software for any purpose with or

without fee is hereby granted, provided that the above copyright notice and this

permission notice appear in all copies.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE

AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES

OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR

OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE

SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in

advertising or otherwise to promote the sale, use or other dealings in this Software

without prior written authorization of the copyright holder.

o

c-ares

http://c-ares.haxx.se
Copyright 1998 by the Massachusetts Institute of Technology.
Permission to use, copy, modify, and distribute this software and its documentation

for any purpose and without fee is hereby granted, provided that the above copyright

notice appear in all copies and that both that copyright notice and this permission

notice appear in supporting documentation, and that the name of M.I.T. not be used

in advertising or publicity pertaining to distribution of the software without specific,

written prior permission. M.I.T. makes no representations about the suitability of this

software for any purpose. It is provided “as is” without express or implied warranty.

Contents

Connections

Playback

Settings

Tips

Appendix

285

Front panel

Display

Rear panel

Remote

Index

Содержание SR5010

































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SR5010

Nelson 700 Series Maintenance Manual preview
700 Series
Бренд: Nelson Страницы: 12
Fender PASSPORT Usage And Troubleshooting preview
PASSPORT
Бренд: Fender Страницы: 3
Nacon GA-200 Instruction Manual preview
GA-200
Бренд: Nacon Страницы: 12
Martin Audio EM150 Manual preview
EM150
Бренд: Martin Audio Страницы: 1
Innova HRC Installation Manual - Use And Maintenance preview
HRC
Бренд: Innova Страницы: 36
PAW CoolBloC C34 DN 32 Installation And Operation Instructions Manual preview
CoolBloC C34 DN 32
Бренд: PAW Страницы: 24
Stuart Turner Mainsboost Plus Installation, Operation & Maintenance Instructions Manual preview
Mainsboost Plus
Бренд: Stuart Turner Страницы: 28
QMotion QM 1000AS User Manual preview
QM 1000AS
Бренд: QMotion Страницы: 16
ubbink UWA-2E Installation Regulations preview
UWA-2E
Бренд: ubbink Страницы: 61
Aiwa CX-NA31 Operating Instructions Manual preview
CX-NA31
Бренд: Aiwa Страницы: 76
Idex MICROPUMP 668-400-2 Component Maintenance Manual With Illustrated Parts List preview
MICROPUMP 668-400-2
Бренд: Idex Страницы: 33
ITALIAN STAGE IS SPX08AUB User Manual preview
IS SPX08AUB
Бренд: ITALIAN STAGE Страницы: 18
iDance BLASTER 20 User Manual preview
BLASTER 20
Бренд: iDance Страницы: 26
LEM T5A Owner'S Manual preview
T5A
Бренд: LEM Страницы: 18
Topp Music Gear TRANS-PORT Operation Instructions Manual preview
TRANS-PORT
Бренд: Topp Music Gear Страницы: 8
Ramsa WS-A500-K Operating Instructions Manual preview
WS-A500-K
Бренд: Ramsa Страницы: 30
Atlas PM8CX Installation Instructions Manual preview
PM8CX
Бренд: Atlas Страницы: 7
Mitsubishi Electric X-7 Service Manual preview
X-7
Бренд: Mitsubishi Electric Страницы: 50

Бренды по названию

Популярные бренды

Загрузить еще бренды