Marantz Slim-line NR1402, Руководство пользователя

Страница: 21 / 99

18
Playback (Basic operation)
n Playing a Blu-ray Disc player/DVD player
(
v
page 19 )
n
Playing a CD player (
v
page 19 )
n Tuning in radio stations ( v page 20 )
Selecting a listening mode (Surround mode)
( v page 24 )
n Selecting the input source ( v
page 18
)
n Adjusting the master volume
(
v
page 19 )
n
Turning off the sound temporarily (
v
page 19 )
Playback (Advanced operation) (
v
page 38 )
Settings ( v page 11 )
Important information
Before starting playback, make the connections between the different
devices and the settings on the unit.
NOTE
Also refer to the operating instructions of the connected devices
when playing them.
Selecting the input source
Press the input source select button
(
BD
,
DVD
,
SAT
,
TV
,
CD
,
TUNER
or
M-XP
) twice to be played back.
When an input source select button (
BD
,
DVD
,
SAT
,
TV
,
CD
,
TUNER
or
M-XP
) is pressed
once, the unit switches to device selected
by the operating mode of the remote control.
If the input source select button is then
pressed again twice, the input source for the
unit is switched.
Select input source “AUX” to play back music from an audio system
connected to the AUX INPUT jack.
The input source “GAME” is selected to playback from a game device
connected to GAME connector of HDMI IN.
Select the input source “AUX” or “GAME” using one of the following
methods.
• “Source Select” menu
(“Using the “Source Select” menu” provided on the right)
•
SOURCE d f
button on the remote control unit
(“Using the
SOURCE d f
button on the remote control unit”
( v page 19 ))
•
INPUT SELECTOR
knob on the main unit
(“Using the knob on the main unit” ( v page 19 ))
You can also use the following operation to select an input
source.
n Using the “Source Select” menu
Player
BD
DVD
CD
M-XPort
Video
SAT
TV
GAME
AUX
Tuner
TUNER
[ENTER] Enter [ ] Move
Source Select
The currently selected input
source is highlighted.
q Press
3
.
Display the “Source Select” menu.
w Use
uio p
to select the input source,
then press
ENTER
.
The input source is set and the source
selection menu is turned off.
• Input sources that are not going to be used can be set ahead of time.
Make this setting at “Source Delete” ( v page 59 ).
• To turn off the source selection menu without selecting an input
source, press
3
again.
• When
3
is pressed, the AMP-operation mode starts automatically
(
v
page 68 ).
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
BD
v See overleaf