15
N
a
m
es
a
N
d
Fu
N
ct
IO
N
s
B
a
sI
c
cO
N
N
ec
tI
O
N
B
a
sI
c
O
pe
ra
tI
O
N
a
d
Va
N
ce
d
cO
N
N
ec
tI
O
N
s
re
m
Ot
e c
ON
tr
Ol
le
r
Op
er
at
IO
N
tr
Ou
Bl
es
HO
Ot
IN
G
O
tH
er
s
a
pp
lI
ca
tI
O
N
O
pe
ra
tI
O
N
ENGLISH
applIcatION OperatION (cd OperatION)
3.
With the sequence described in step
2
above, program another track. Repeat that
sequence to program all the tracks you
want. You can program up to 30 tracks.
(Example: The 7th track is chosen and total
length of 7th and 15th is 7min50sec)
Total programmed
number
Total playing time of
programmed tracks
4.
Press
2
button to starts playback in
programmed order.
Note:
Repeat Play, Random Play, and AMS Play cannot
be conducted while the unit is in PROGRAM mode
(i.e. when the PROG indicator is lit).
tO cHecK tHe prOGrammed
tracKs
CLEAR
tO delete a prOGrammed tracK
1.
Press
CLEAR
button in stop mode when
program has been made (When “
PROG
”
indicator is lighting up).
2.
Every time press
CLEAR
button, the
programmed tracks are deleted in order
from the last track programmed.
tO clear WHOle prOGram
Press
7
STOP
button two times while in program
play. In the stop mode, press
7
STOP
button once.
Program can also be cleared by pressing
0
OPEN/
CLOSE
button to open the disc tray.
tO add tracKs tO prOGram
Tracks can be added to the end of program when
program is remaining (“
PROG
” indicator is lighting
up) and in stop mode.
please Be careFul aBOut tHe FOllOWING
matters
• When programming 1st through 9th tracks in a
disc that has over 10 tracks by using numeric
buttons. For instance, programming the 3rd track
after programming the 1st track, press
3
button
more than approximately 1.5 seconds after
1
button is pressed. When a program is finalized,
the time is updated.
• Likewise, when programming a track at 10th or
after. For example, to program 13th track, press
3
button within approximately 1.5 seconds after
1
button is pressed.
• When programming a track in a disc that has less
than 9 tracks. For instance, to program the 5th
track after 4th track has been programmed, press
5
button more than approximately 0.5 second
after
4
button is pressed.
searcHING YOur FaVOrIte
tracKs (ams (autOmatIc
musIc scaN) plaY)
AMS
This feature is convenient for searching where your
favorite track is.
If the
AMS
button is pressed while a track is
stopped, the PLAY indicator “
2
” flashes, and the
first ten seconds of each track on the disk will be
played starting from the first track.
Also, if the
AMS
button is pressed during playback,
the PLAY indicator “
2
” flashes, and the program
jumps to the next track after approximately
10 seconds elapses on the display time.
Once you find a song that you want to listen to,
press the
AMS
button again or press the
2
button.
The PLAY indicator lights up and normal playback
resumes from the current track.
Note:
AMS Play cannot be conducted while the unit is in
PROGRAM mode.
sWItcHING sOuNd mOde
(super audIO cd)
Please set Start Sound Mode to “SA-CD” (see
page 16).
S.MODE
1.
Press
S.MODE
button in stop mode (not
playing).
The currently selected layer or area is
shown on the display. (CD or Super Audio
CD)
If
S.MODE
button is pressed again, a
playable layer or area will be shown, and
the layer or area will be switched to new
one.
• When layer or area is switched, TOC will
be read again.
• The sound mode cannot be changed for
Audio CDs and discs with only a Super
Audio CD area.
• The sound mode on hybrid layer discs
will be changed in the following order.
Super Audio CD stereo area
CD layer
2.
Press the
S.MODE
button during playback.
The currently selected layer or area is
shown on the display. (CD or Super Audio
CD)
If
S.MODE
button is pressed again, the
playback is stopped, and the layer or area
will be switched to new one.
When you want to listen at that area,
press
2
button again. The playback will be
started.
