Marantz RX8001, Руководство пользователя

Страница: 13 / 20

E
N
G
LI
S
H
10
RX8001 User Guide
5
Select the Extender that you want to configure and click on the Configure button.
The Configuration Tool opens in the browser.
6
Select Firmware Update in the left navigation pane.
The Firmware Update page opens.
7
Follow the onscreen instructions.
When you are asked to browse to the update file, you need to select the ZIP file you
downloaded earlier from the website.
Tip When your Extender is not recognized by the Extender Discovery tool, update the Extender
with the crossed Ethernet cable, as described on page 9.
Specifications
The specifications and design of this product are subject to change without notice.
General Dark grey ABS housing with poly carbonate front plate
802.11 b/g compliant RF technology
4 LED indications for Power, WiFi, Network and Busy
Up to 16 extenders and 16 control panels in a system (for all modes)
4 addressable outputs for IR emitters
Ethernet RJ45 connection
Rotatable RF antenna
Positioning: freestanding or mounted in any position
Modes Stand-alone (wireless) : Similar to WiFi ad-hoc mode; no access point and
router required
Network (wireless) : Similar to WiFi infrastructure mode; used in a system with
a router and access point
Network (wired via Ethernet) : used in a system with a router and access point
Dimensions 3,98 x 6,18 x 1,3 inch (101,2 x 157 x 33,5 mm)
Operating temperature 32°F to 122°F (0°C to 50°C)
Infrared (IR) IR frequency range: 25kHz-1MHz (including DC/flash codes)
IR power out: 2 levels
Radio Frequency (RF) 802.11g at 2.4 GHz with additional proprietary protocol
Dual IR emitters Number of IR emitters: up to 4 (2x2), emitters wired in series
0.13 inch (3.5 mm) mono mini-jack
Cable length: 9 ft (2.7 meters)
Mono mini-jack cables 0.13 inch (3.5 mm) mono mini-jack
Cable length: 5 ft (1.5 meters)
Power adapter 100V-240 VAC / 50-60 Hz Power adapter (5 VDC/2A output, UL-CE approved)
Accessories Warranty certificate (For USA/Canada only)
Wireless Extender User Guide
© Marantz Brand Company – A division of D&M Holdings Inc. D&M Building, 2 -1 Nisshin-CHO, Kawasaki-KU, Kawasaki-
SHI, Kanagawa, 210-8569, Japan.
Remarks:
All rights are reserved. Reproduction in whole or in part is prohibited without prior consent of the copyright owner.
Marantz Brand Company – A division of D&M Holdings Inc. is not liable for omissions or for technical or editorial errors
in this manual or for damages directly or indirectly resulting from the use of the Wireless Extender.
The information in this User Guide may be subject to change without prior notice. All brand or product names are
trademarks or registered trademarks of their respective companies or organizations.