7
REAR PANEL CONNECTIONS
A
LINE INPUT
These jacks should be connected to the LINE OUTPUT of your
source.
B
LINE OUTPUT(Tape,CD,Mix)
These jacks should be connected to the appropriate INPUT of
your PA or monitoring system.
C
MPX FILTER SWITCH
When recording FM broadcast with Dolby NR, set this switch
to the ON position.
D
RC-5 REMOTE CONTROL JACKS
These jacks are used with the Marantz infrared or wired
remote accessories to provide remote control operation of
the PMD350. These jacks can be serially linked to provide
serial remote control operation of multiple RC-5 equipped
products as well.
E
DIGITAL OUTPUT JACKS(IEC958 type II)
This connector outputs the digital signal of the CD Player.
Connect this jack to other IEC958 type II digital inputs such as
a D/A Converter, digital sound processor or amplifier with
IEC958 type II digital inputs such as the Marantz Compact Disc
Recorder.
F
REMOTE EXT(extension) JACKS
Connection with other Marantz components equipped with
the REMOTE EXT. jacks will allow for extended cascade
operation of several units.
G
POWER CORD
120VAC input power connector.
H
MIC(MICROPHONE) INPUT JACKS
For use with microphones as the input source into the tape
deck. When microphones are installed into these jacks, the
line inputs are automatically switched off and only the micro-
phone signal is input into the unit. For mono recording insert
the microphone into the L (Left) jack .
I
FADER START JACKS
Upon receiving a dry switch contact closure on the jack
connections, the CD Player can be switched in and out of play
and play/pause mode. The Tape deck can be switched in and
out of play and stop or the record and stop mode.
FRONT PANEL FEATURES
q
POWER SWITCH BUTTON
Push the POWER switch in to turn power to the unit on and
off. When power is turned off, all past setting are removed
from memory and the unit returns to its default setting upon
the next power up.
w
CASSETTE TAPE HOLDER
This section holds the cassette tape for tape Play and Re-
cord functionality. Tapes that have the record protect knock-
out removed will not enter into the record mode.
e
EJECT BUTTON
Press the eject button to open the cassette tape holder.
r
TAPE DECK AND CD PLAYER CONTROL
TAPE DECK CONTROL BUTTONS
:
STOP BUTTON
Press the stop button to cancel all current operations of the
tape deck.
:
FORWARD PLAY BUTTON
Press the forward play button to engage the tape deck into the
forward play function.
:
REVERSE PLAY BUTTON
Press the reverse play button to engage the tape deck into the
reverse play function.
:
REWIND BUTTON
Press the rewind button to engage the tape transport into fast
rewind mode from the right(take-up) to the left(supply) reels.
:
FAST FORWARD BUTTON
Press the fast forward button to engage the tape transport into
the fast forward wind mode from the left(supply) to the
right(take-up) reels.
:
REC/PAUSE BUTTON
Press the rec / pause button to engage the tape transport into
the record pause mode. In this mode the tape deck is armed
to begin recording. The tape record mode can be engaged by
pressing the forward play or reverse play buttons.
CD PLAYER CONTROL BUTTONS
STOP/EJECT BUTTON
Press the Stop/Eject button to stop the CD Player while in the
play mode. Press the Stop/ Eject button while in the Stop
mode to open the door and eject the disk. During the program
mode the Stop/Eject button will cancel the current program as
long as the CD player is in the Stop mode.
PLAY/PAUSE BUTTON
Press the PLAY/PAUSE button the change the CD player
mode from CD play to CD pause or from CD pause to CD play.
PREVIOUS BUTTON
When the CD player is in the play or pause mode, pressing the
PREVIOUS button will skip back one track for every time the
button is pushed.
During the program mode this function is used along with the
next button to select the desired tracks to be played.
Press and hold during playback to fast reverse the CD play.
NEXT BUTTON
When the CD player is in the play or pause mode, pressing the
NEXT button will skip forward one track for every time the
button is pushed. During the program mode this function is
used along with the previous button to select the desired
tracks to be played.
Press and hold during playback to fast forward the CD play.
t
TAPE COUNTER BUTTON
MEMO BUTTON
Press the MEMO button to store a memory point into the
counter memory. Once this point is set, the tape deck will
rewind or fast forward until it reaches this point in the tape and
will stop. To cancel the memory control press the MEMO
button again.
RESET BUTTON
Press the RESET button to reset the current tape counter
reading from its existing point to “0000”.
Содержание PMD350
Страница 1: ...16 Model PMD350 User Guide Combination Stereo Cassette Deck CD Player...
Страница 5: ......
