Marantz PMD350, Руководство пользователя

Страница: 15 / 16

14
NOTICE
•
Quick reverse operation will only occur after the transport has
been moving for 15 seconds. Before that time it take
approximatery 4 seconds to reverse.
•
One second of audio is lost during quick reverse.
•
Automatic search operations can only operate on one well at a
time.
•
Eject buttons will not function unless the deck is in the stop
mode. Thus, if the power is turned off without hitting the STOP
button, the door may not open.
•
The tape counters are only approximate measurements of min-
utes and seconds and are not intended for timing-critical applica-
tions. They are most accurate with 60 minute tapes.
2. Check that the disc is not scratched.
3. Check that the disc is not warped.
CLEANING OF EXTERIOR SURFACES
With proper care and cleaning, the exterior finish of your equip-
ment will last indefinitely. Never use scouring pads, steel wool,
scouring powders or harsh chemical agents (e.g. lye solution),
alcohol, thinners,benzine, insecticide or other volatile substances,
as these will mar the finish of the cabinet. Likewise, never use
cloths containing chemical substances. If the equipment becomes
dirty, wipe the external surfaces with a soft, lint-free cloth.
If the cabinet becomes heavily soiled:
– dilute some washing-up liquid in water, in a ratio of one part
detergent to six parts water;
– dip a soft, lint-free cloth in the solution and wring the cloth out
until it is damp;
– wipe the equipment with the damp cloth;
– dry the equipment by wiping it with a dry cloth.
COMPACT DISCS
The glossy side shining like a rainbow is the front side of the disc,
and the side on which the label is printed is the back.
Unlike conventional turntables for playing analog discs, Compact
Disc Player reads the information recorded on the disc from
underneath without contacting it using a beam of laser light.
Therefore, the performance of a compact disc will not degrade like
conventional analog records.
Handle discs carefully so as not to damage or scratch the front
side.
To protect the disc, avoid placing it in the following locations:
– In direct sunlight or near a source of heat like a heater.
– In a place which is damp or dirty.
– In a place which could be exposed to rain, such as near a
window.
Always keep the disc surface clean.
Up to six billion data units are recorded on the front side of the disc.
When cleaning the disc surface, always be sure to use a special
compact disc cleaner and wipe as shown below.
• Do not use conventional record cleaner for analog records, as
this will adversely affect the disc surface.
Store discs properly by placing them in their disc cases.
Do not wipe in circumferential direction.
Wipe in a radial direction.
capstans
heads
pinch wheels
Figure 2
Figure 4
Metal tape
detection hole
HIGH/Position tape
detection hole
Figure 3
Figure 5