Marantz PM7000N, Руководство по обслуживанию

Страница: 52 / 64

2. Factory Initialization Mode
Initialize backup data of the MCU.
2.1. Starting up
1. Insert the AC plug while pressing buttons " SOURCE DIRECT " and " BACK " together, and wait for more
than 3 seconds.
2. " Factory Reset " is shown on the display for 5 seconds.
" Factory Reset " is displayed for 5 seconds, then the language selection screen is displayed.
Network function settings are not initialized.
2.2. Factory Reset item
Items Default
(1) Source Internet Radio
(2) Dimmer 100%
(3) Sleep Off
(4) Repeat / Random Off
(5) Setup Menu items Clear all (except TV Input & IR Control)
(6) Volume 0
(7) Last Digital In Optical 1
(8) Source Direct Off
(9) Panel/Remote Lock All off
(10) Protection history Delete
(11) Update retry flag Clear
(12) KPI data Clear
3. Firmware Factory Restore
Used when replacing the Network module.
See " 3. Update method when the MAIN PCB or network module is replaced (Using a USB flash drive NET-
WORK MODULE) "
4. Network Function Reset
Initializes network settings.
4.1. Actions
The following items are initialized.
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
(12) TV Input setting
(13) IR Control setting
4.2. Starting up
1. While the power is On, hold down buttons " POWER " and " BACK " for at least 3 seconds.
2. "
Please wait
" is displayed. (Language : case of English)
Changes between ".", then ".." and "..." for 1 second each.
3. "
Completed
" is shown on the display for 5 seconds. (Language : case of English)
4. After this is displayed for 5 seconds, the display returns to the SOURCE display that was shown before
the Network Function Reset.
・All settings, including network function settings, are initialized.
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
52