Explanatory Photos for DISASSEMBLY
• For the shooting direction of each photos used in this manual, see the photo below.
•
A, B, C and D
in the photo below indicate the shooting directions of photos.
• The photographs with no shooting direction indicated were taken from the top of the unit.
• Photos of PM7000N N1B are used in this manual.
The viewpoint of each photograph
(Shooting direction : X) [View from the top]
↓
Shooting direction: C
↓
↑
Shooting direction: D
↑
↑
Shooting direction: A
↑
↓
Shooting direction: B
↓
Proceeding :
TOP COVER
→
FRONT ASSY
(1) Remove the screws.
(2) Remove the screws. Cut the wire clamp, then remove the connector. Remove the TAPE.
Remove the FFC.
1. FRONT ASSY
View from the bottom
x4
↓
Shooting direction: B
↓
x1
x1
x1
x1
x1
FFC
FFC
BN1511
CN715
CN706
TAPE
CUT
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
37