Marantz CC-4000 OSE, Руководство по обслуживанию

Страница: 10 / 31

3-4 3-4
NEXT
Button pressed?
Y
PLAY
Button pressed?
Y
N
PLAY
Button pressed?
N
STOP
Button pressed?
Y
Y
N
Display shows
"CD"
Display shows
"FOC OK"
Display shows
"FOC ERR"
Is FOCUS found?
Y
Y
N
PLAY
Button pressed?
STOP
Button pressed?
N
N
STOP
Button pressed?
Y
Y
N
Display shows
"RDL"
Radial Servo Test
To start service test program
hold STOP & PLAY
depressed while
plugging in the mains cord
Display shows the
ROM version
"S V yy"
(Main menu)
S refers to Service Mode.
V refers to Version.
N
NEXT
Button pressed?
Y
PREVIOUS
Button pressed?
Y
Sledge jumps outward in
steps of 16-tracks
Sledge jumps inward in
steps of 16-tracks
N
SERVICE TEST PROGRAM II
yy refers to Software version
number of
∝
Processor.
(Counting up from 01 to 99)
Sledge
Motor Test
Changer
Mech. Test
Tray
Motor Test
Sledge
Motor Test
Disc
Motor Test
Changer
Mech. Test
Tray
Motor Test
Disc starts turning,
is speed ok?
Y
N
Focus Servo Test
Disc Servo Test
CD Menu
Jump tracks Test
STOP
Button pressed?
Y
N
Display becomes
"DISC OK"
Display remains as
"DISC ERR"
Disc
Motor Test
Display shows
"DISC"
Sledge
Motor Test
CD_X #
Button pressed?
Y
Change to
selected disc
N
Changer
Mechanism
Test
# CD_X refers to CD1, CD2 or CD3
OPEN/CLOSE
Button pressed?
Y
Close Tray
N
Tray Motor
Test
Is tray
closed?
Y
N
Open Tray
SHUFFLE
Button pressed?
Y
PROGRAM
Button pressed?
Y
N
Disc Motor turns Counter
Clockwise & Display shows
"CCW"
Disc Motor turns
Clockwise & Display shows
"CW"
Disc Motor
Test
N
N
NEXT
Button pressed?
Y
PREVIOUS
Button pressed?
Y
Sledge moves outside
Display shows
"SLD 0"
Sledge moves inside
Display shows
"SLD I"
Sledge Motor
Test
In software version 15 and below there are some slight problems in the
Service Program for the CD Test which will be resolved by running change.
The problems are:
1) If the Tray Motor test is done with the Tray in the open position, the tray
will close only after the pressing the Open/Close button twice.
2) If this test is performed after the Tray Motor Test, the tray may not change
as selected. The test will resumed correctly if CD test is quit and restarted.
3) After performing the Sledge Motor Test or Disc Motor Test the set will
return automatically to the "CD Menu".
Note:
PCS 101 018