Mantracourt Electronics Limited
T24-RM1 User Manual
12
Input Settings
Here you can set the Data Tags of the data used as the inputs.
The description in green below the ‘Relay1’ and ‘Relay2’ captions indicate the way in which the values from
the Data Tags will be used to compare against the setpoint to determine whether the relay will activate.
See the
Relay Operation Settings
section for details.
Items you can change:
Relay1DataTag[1-8]
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 1.
Relay2DataTag[1-8]
Enter up to eight Data Tags the data from which will be used to determine the
value compared to the set point to control relay 2.
Zero Offset [1-2]
This value will be subtracted from the total of the summed data from the data
tags for Relay 1.
