MANTION SMT Adresse postale : 2 rue des Métiers 21110 Genlis
Tél. : (33) 03 80 37 85 71 Fax : (33) 03 80 37 88 61
21
Start-up
Learning
The motors run at slow speed until the learning phase has been completed.
Operating procedure:
1) Remove the protective sticky tape
2)
Only for radio products:
Pairing your radio transmitter by following the instructions provided in the instructions for
pairing radio.
3)
Start the learning cycle:
With a small screwdriver, press the prog.
4) The shutters open completely and then close. The Led blinks during all this cycle
5) During the closing, shutter 2 is shifted 6 seconds compared to shutter 1.
6) When the shutter is close and the Led is no longer flashing, the system is operational
7) Replace the protective sticky tape
Operating the shutters
Opening of the shutters
Press on the open push button
Closing of the shutters
Press on the close push button
Stopping of the shutters in
middle position
Repeat the last command.
(Open button when opening in progress)
(Button closure if closure in progress.
WIBAT APPLIQUE is equipped with a current-measuring safety device. If any obstacle is encountered when the
shutter is opening or closing, the shutter reverses its direction and returns to its initial position.
Prog. Button
