4
Pre-installation
ELECTRICAL SPECIFICATIONS
□
Voltage:
220
VAC,
5
0 Hz
□
Watts: 1
5
00 Watts
TOOLS REQUIRED
Phillips
screwdriver
(not provided)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part
Description
Quantity
18
Screw
12 + 3 extra
PACKAGE CONTENTS
Part
Description
Quantity
W
Fireplace Insert
1
X
Top Trim
1
Y
Side Trim
2
This insert has front panel made of GLASS! ALWAYS use extreme caution when handling glass.
Failure to do so could result in personal injury or property damage.
18
5
Assembly
1
Attaching the metal trims
□
Fasten the top trim (X) to the top of the fireplace insert (W) with two screws (18). Make sure that the right angle side points towards the front
of the unit.
□
Align and attach two side trims (Y) to both sides of the fireplace insert (W) respectively with the right angle side facing the front of the unit,
using two screws (18) per trim.
2
Installing the fireplace insert
□
Carefully set the fireplace insert (W) into the back of the mantel and center it in the opening. Use care not to scratch the wood. Check the
alignment, and then attach the fireplace insert (W) to the mantel by inserting the screws (18) through the drilled holes on the trims (X and Y)
and securely screw into place using a Phillips screwdriver.
NOTE: DO NOT attempt to install the insert from the front of the mantel - it will not fit.
I
W
18
18
18
Y
Y
W
X
18
18
18
18
