MAN-MD-H-0507-01
Page
16
of
24
5.3.6 Sample
This function can be used to set the number of readings the unit will take to calculate the
average and present it as a measurement in the display.
5.3.7 ID
Here you can set up users names / passwords and when they shall be requested by the unit.
5.3.7.1 User ID
To create users and its passwords
5.3.7.1.1 edit
-Chose the user number between 00 and 50 , press
READ
-
Coose a name for this user using ▲ to scroll faster to letters , ▼ to scroll faster to
numbers (both can be used to go up or down) and
MENU/READ
(send the cursor to the
right/left), press and hold
SAVE
for 3 seconds to store the data.
-
You will see “PIN:” on the Display, use ▲ to scroll faster to letters , ▼ to scroll faster to
numbers (both can be used to go up or down) and
MENU/READ
(send the cursor to the
right/left), press and hold
SAVE
for 3 seconds to store the data.
-Press and Hold
ESC for 3 seconds
to return to the previous menu.
5.3.7.1.2 Request
To define when the user ID and password will be required
-
Choose between the following options using ▲ or ▼ , when done, press and hold
SAVE
for 3 seconds to store the data and
ESC
to return to the previous menu.
Always
– ID and password will be request at every measurement.
On Start
– ID and password will be request at Instrument Start Up.
MEMO
– ID and password will be request when
SAVE
is pressed.
(reading mode).
Previous
– ID and password will not be request, the previous user informed
will be assigned for all operations.
No
– ID and password will not be request
.
