MAN-MD-H-0507-01
Page
14
of
24
5.2.2 Backlight Time
From 0 up to 60 minutes of backlight on.
Using ▲ or ▼ change the time to the desired backlight time, when done, press and hold
SAVE
for 3 seconds to store the data and
ESC
to return to the previous menu.
5.2.3 Backlight Level
From 0 up to 100 (intensity level)
Using ▲ or ▼ change the level to the desired, when done, press and hold
SAVE
for 3 seconds
to store the data and
ESC
to return to the previous menu.
5.2.4 Partial Res.
Wen this mode is On, the unit will show resoults during the measurement cycle, intermediate
readings.
Using ▲ or ▼ change to select yes or no, when done, press and hold
SAVE
for 3 seconds to
store the data and
ESC
to return to the previous menu.
5.2.5 Big number
Using ▲ or ▼ change it from yes or no, when done, press and hold
SAVE
for 3 seconds to store
the data and
ESC
to return to the previous menu.
If you shoose yes, the numbers will apear larger on the display
5.3 Instrument
When inside this configuration you can set Auto off, Readings, Color compensation, courves, fast
settling, Sampling, ID, Calibratio int
erval, personalization, patrimony, use ▲ or ▼ to select between
the options and
READ
to enter it or
ESC
to go gack to the previous menu.
5.3.1 Auto off
The Auto off function shall be activated to save the bateryes, iit can be configurated to turn the
unit off after 0 to 60 minutes of inactivity.
Using ▲ or ▼ change the time to the desired level, when done, press and hold
SAVE
for 3
seconds to store the data and
ESC
to return to the previous menu.
NOTE: When the time is in 0 minutes the auto off will not be operational.
