DVD-048
EMPEROR BASIC 3
32
Aspect Ratio
– 16 : 9 (Wide Screen): Choose this setting if your DVD
player is connected to a wide screen TV. If you cho-
ose this setting and you don’t have a wide screen TV,
the images on the screen may appear distorted due
to vertical compression.
– 4 : 3 LB (Letter Box): Choosing this setting if your
DVD player is connected to a normal ratio TV. con-
nector You’ll see the movies in their original aspect
ratio (height-to-width ratio). You’ll see the entire fra-
me of the movie, but it will take up a smaller portion
of the screen vertically. The movie might appear with
black bars at the top and bottom of the screen.
– 4 : 3 PS (Pan & Scan): Choosing this setting if your
DVD player is connected to a normal ratio TV. You
can fill the movie to the entire screen of your TV. This
might mean that parts of the picture (the left and ri-
ght edges) won’t be seen.
Notes:
The image display ratio is related to the recor-
ded disc format. Some disc can not display images in the
aspect ratio you choose.
If you play a disc recorded in 4:3 format on a wide scre-
en TV, black bars will appear on the left and right side of
the screen.
You must adjust the screen setting depending on the
type of the television you have.
View Mode
With this option you can select the different video vision
mode on the screen.
TV System
This product supports output of various system, inclu-
ding AUTO, NTSC, PAL.
If your TV set has only NTSC or PAL system, the screen
will blink and become colorless when a wrong system is
selected. In this case, press the N/P button on the Remote
Control to switch the TV TYPE.
Note: For more information of output format, refer to the
instructions or your TV set.
Video Output
Selecting the Video Output setting to switch between
different video outputs
S-VIDEO :Set the video output to interlacing outputt.
COMPONENT: Set the video output to YUV output.
P-SCAN: If your TV is progressive TV, please select the
option. You can get better picture quality.
RGB: Set the video output to SCART output. If you se-
lect SCART connection, you
should set up the play mode as RGB state, then it will
output normally.
Audio setup
Select Audio in the setup menu, and display the Audio
submenu.
