9
4.In setting mode, it will be switched to time display after 8 seconds if no
key be pressed.
DATE SET:
1.In the state of Month/Date, hold “MODE” for 2sec to enter into date
setting model.The figure to be set will flashing.
2.Press“UP(
▲
)”or“DOWN(
▼
)”key,the setting value will go up/go down
for one figure
，
Holding the “UP(
▲
)”or“DOWN(
▼
)”key for 2 second will
go up/go down digits in great steps.The sequence of setting:
Year→Month→Date→Exit.The week will adjust automatically.
3.Press the “MODE” key to save the change and switch to the next setting
mode
4.In setting mode, it will be switched to time display after 8 seconds if no
key be pressed.
ALARM SET:
1.In the state of Alarm,hold “MODE” for 2sec to enter into alarm setting
model.The figure to be set will flashing.
2.Press“UP(
▲
)”or“DOWN(
▼
)”key,the setting value will go up/go down
for one figure,Holding the “UP(
▲
)”or“DOWN(
▼
)”key for 2 second will will
go up/go down digits in great steps.The sequence of setting:
Hour→Minutes→exit.
3.Press the “MODE” key to save the change and switch to the next setting
mode
4.In setting mode, it will be switched to time display after 8 seconds if no
key be pressed.
ALARM MODE:
1.The alarm will ring for 2 minute when it goes on.
2.When alarm is ringing
，
Press “SNOOZE” key to enter snooze status, the
alarm will go on again in 8 minutes. Press other keys to exit the alarm.
User’s Manual
EN
