REPAIRS
Small Cuts
Small cuts will eventually gap open. To repair, clean any dirt from the cut and apply MLG-33 seam sealer.
Replacing Damaged Areas – Plugs
If you must replace a damaged area, follow these steps:
• Select a design element from the scrap material that matches the design to be removed from the existing resilient.
• Accurately overlay this piece over the damaged area.
• Double cut on the inside of the grout line if possible and remove the damaged piece. If the floor covering you are
repairing is installed over existing resilient flooring, be careful not to cut too deep.
• If
the
Insight
®
Plus GB
was installed FULLY ADHERED, apply a thin layer of MT-711 to the back of the repair piece
and place into position. Roll with a hand roller. Apply MLG-33 seam sealer. Protect from foot traffic until sealer is
fully
cured.
• If
the
Insight
®
Plus GB
was installed Loose Lay, apply a thin layer of MT- 711 on the back of the repair piece as well as
under the edges of the repair area. Position the repair piece into the cut out area and lightly roll the area with a hand
seam roller. Apply MLG-33 seam sealer. Protect from foot traffic until sealer is fully cured.
Choices that Work.
Questions about warranties? call 800 241 2262 or visit www.manningtoncommercial.com
July, 2015
Insight
®
Plus GB
Installation Guidelines
Insight
®
Plus GB Instal
lat
ion Guidel
ines