WARNING!!
IF ANY EXCESS ADHESIVE COMES UP BETWEEN THE SEAMS, OVER THE TOP, OR OOZES OUT OF ANY
PLACE, CLEAN IT UP WHILE WET WITH A WET RAG. IF DRY, USE RUBBING ALCOHOL OR MINERAL SPIRITS. THE
ADHESIVE IS MUCH EASIER TO CLEAN WHILE WET. IF YOU LET THE EXCESS DRY, IT WILL BE DIFFICULT TO REMOVE.
SUBSEQUENT DAMAGE MAY OCCUR TO THE BASE OR SURROUNDING AREAS IN THE PROCESS.
Final Steps:
• Ensure that all areas are securely bonded.
• Make any needed repairs or adjustments.
• Maintain 65º F (18.3º C) and 85º F (29.5º C) for the next 48 hours.
• Clean-up any excess adhesive as described above.
• Do not perform maintenance for 24 hours.
Edge Effects
Installation Instructions
Choices that Work.
For more information, please contact Mannington Technical Services at
800 241 2262 Ext. 3 or visit www.manningtoncommercial.com.
December, 2015
