Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: [email protected]
SGWH1
Guitar wall hanger
SAFTY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate
plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.adamhall.com/media/shop/
downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Daimler Straße 9, 61267 Neu Ans-
pach / Email [email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste separation)
This symbol on the product, or the documents accompanying the product, indicates that this appliance may not
be treated as household waste. This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
INTRODUCTION
Guitar wall hanger
• High-quality foam cover to protect your instrument
• Opening width 55 mm
• Does not include screws
• Not suitable for long-term use with guitars that have a nitro lacquer finish
INFORMATION REGARDING NITROLAQUER:
We recommend to refer to your instrument’s manual or manufacturer about the type of finish on your guitar. We
cannot guarantee that this Guitar Stand is safe to use with nitro finished instruments due to the large number of
varying formulations employed today. For further information please contact us or visit www.adamhall.com.
SPECIFICATIONS
Model number:
SGWH1
Product type
Stands and Tripods
Type
guitar stand
Material
steel
Surface
powder coated
Colour
Black
Suitable for
acoustic guitars, electric guitars
Weight
0.21 kg
