MANN+HUMMEL TRI-KLEEN 500 UV BR, Инструкция по эксплуатации

Страница: 12 / 24

8
By touching on the equipment's LCD screen, we will go to the screen below with information about the filter status
divided in 3 categories: New (cleaned filter, without accumulation of impurities), Saturated (the change of filter was
made for some time and with considerable level of impurities retained, therefore it is a warning that the filter should be
changed in order to avoid future damages to the equipment and ensure a good functioning) and
Critical (when the
allowed level of retained impurities is already exceeded and the filter has to be changed urgently), status of lamps which
states, if the lamps are
OK in order to be turned on, or if there is any irregularities the lamps will state as N OK (as for
example a burned lamp), fan speed control, UV lamp ON/OFF, connectivity settings and element's change and screen
locking.
Note : The equipment has an audible alarm which may occur in 3 different situations: N OK Lamp/ N OK Filter/ over 1500
h of operation. And that after corrective action of some mentioned situations; the equipment should have a normal
function again.
Increase the fan speed.
Reduce the fan speed.
TOUCH ON THE SCREEN TO OPERATE THE
EQUIPMENT
FILTER STATUS:
---
0 HOURS OF OPERATION
---------------------------------
LAMPS STATUS
---