MANN+HUMMEL TRI-KLEEN 500 UV BR, Инструкция по эксплуатации

Страница: 11 / 24

7
If the room air filtration units are being used to create and maintain a negative or positive pressure condition, the
pressure differential between the negative or positive room and the environment outside the room should be
monitored with a calibrated instrument according to the requirements. A room pressure monitor should be utilized in
order to ensure that requirements are being met.
Important Note:
Do not operate the unit TRI-KLEEN unless the pre-filter and HEPA filter are installed, and the filter
access door and panel are in place and closed
CONTROL PANEL OPERATION
TRI-KLEEN 500UV BR series units are equipped with an LCD touch screen for controlling and viewing
the status of the unit. Upon providing power to the unit, the LCD screen will turn on and show the
Mann+Hummel logo, after touching the screen, the operator will be directed to the MAIN SCREEN.
If the unit has power and the screen is not illuminated, simply touch the LCD screen to bring up the MAIN SCREEN. Note
that if no buttons have been pushed for 15 seconds, the LCD screen will go to the Mann+Hummel logo again.
MAIN SCREEN
When the TRI-KLEEN portable air filtration unit is put into service and connected to the appropriate power supply, the
screen illuminates and displays the "Mann+Hummel" logo, informing that the equipment is being started.
When in this screen, which we can name of “stand - by”, the TRI-KLEEN equipment is already in function, where it will
bring the previous settings, i.e., the same parameters of last time the equipment was under function and it was turned
off. When it is the first time it is turned on, it will have the manufacturer's settings.
INITIALIZING...