Your REFERENCE MICROPHONE Power Supply has been factory set to the
correct mains voltage for your country. The voltage setting is marked on the serial badge,
located on the underside of the power suppy. Check that this complies with your local
supply.
Export units for certain markets have a moulded mains plug fitted to comply
with local requirements. If your unit does not have a plug fitted the coloured wires should
be connected to the appropriate plug terminals in accordance with the following code:
GREEN/YELLOW
EARTH
BLUE
NEUTRAL
BROWN
LIVE
As the colours of the wires in the mains lead may not correspond with the
coloured marking identifying the terminals in your plug proceed as follows:
The wire which is coloured GREEN/YELLOW must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured GREEN or
GREEN and YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked by the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which
is marked by the letter L or coloured RED.
DO NOT CONNECT/SWITCH ON THE MAINS SUPPLY UNTIL ALL OTHER
CONNECTIONS HAVE BEEN MADE.
Note: Units are purpose built for original destination country’s mains voltage: 100V,
120V, or 220-240VAC as indicated on the serial number badge. Power transformer
can be rewired for another country’s mains voltage via internal jumpers and fuse
change. See page 11 for details.
100V and 120V operation: 250mA SLO-BLO fuse.
220-240V operation: 125mA SLO-BLO fuse.
***Fuses for ALL VOLTAGES are 5x20mm GDC packaged fuses.***
MAINS CONNECTIONS
Waste Electrical and Electronic Equipment (WEEE)
Information for customers:
The European Parliament and the Council of the European Union have issued the Waste Electrical and Electronic
Equipment Directive. The purpose of the Directive is the prevention of waste of electrical and electronic equip-
ment, and to promote the reuse and recycling and other forms of recovery of such waste. As such the Directive
concerns producers, distributors and consumers.
The WEEE directive requires that both manufacturers and end-consumers dispose of electrical and electronic
equipment and parts in an environmentally safe manner, and that equipment and waste are reused or recov-
ered for their materials or energy. Electrical and electronic equipment and parts must not be disposed of with
normal household wastage; all electrical and electronic equipment and parts must be collected and disposed of
separately.
Products and equipment which must be collected for reuse, recycling and
other forms of recovery are marked with the following pictogram:
Small products may not always be marked with this pictogram in which case this is present in the instructions for
use, on the guarantee certificate and printed on the packaging.
When disposing of electrical and electronic equipment by use of the collection systems available in your country,
you protect the environment, human health and contribute to the prudent and rational use of natural resources.
Collecting electrical and electronic equipment and waste prevents the potential contamination of nature with the
hazardous substances which may be present in electrical and electronic products and equipment.
Your MANLEY or LANGEVIN retailer will assist with and advise you of the correct way of disposal in your
country.
7
