Manitowoc U65 Скачать руководство пользователя страница 3

Safety Notices

Safety Notices

Read these precautions to prevent personal injury:
•  Read this manual thoroughly before operating, 

installing or performing maintenance on the 

equipment. Failure to follow instructions in this manual 

can cause property damage, injury or death.

•  Routine adjustments and maintenance procedures 

outlined in this manual are not covered by the 

warranty.

•  Proper installation, care and maintenance are 

essential for maximum performance and trouble-

free operation of your equipment. Visit our website 

www.manitowocice.com for manual updates, 

translations, or contact information for service agents 

in your area.

•  This equipment contains high voltage electricity and 

refrigerant charge. Installation and repairs are to be 

performed by properly trained technicians aware of 

the dangers of dealing with high voltage electricity and 

refrigerant under pressure. The technician must also 

be certified in proper refrigerant handling and servicing 

procedures. All lockout and tag out procedures must be 

followed when working on this equipment.

•  This equipment is intended for indoor use only. Do not 

install or operate this equipment in outdoor areas.

DEFINITIONS

 DANGER

Indicates a hazardous situation that, if not avoided, will 

result in death or serious injury. This applies to the most 

extreme situations.

n

Warning

Indicates a hazardous situation that, if not avoided, could 

result in death or serious injury.

,

Caution

Indicates a hazardous situation that, if not avoided, could 

result in minor or moderate injury. 

Notice

Indicates information considered important, but not 

hazard-related (e.g. messages relating to property 

damage).  

NOTE: Indicates useful, extra information about the 

procedure you are performing. 

n

 Warning

Follow these precautions to prevent personal injury 

during installation of this equipment:
•  Installation must comply with all applicable equipment 

fire and health codes with the authority having 

jurisdiction.

•  To avoid instability the installation area must be 

capable of supporting the combined weight of the 

equipment and product. Additionally the equipment 

must be level side to side and front to back.

•  Remove all removable panels before lifting and 

installing and use appropriate safety equipment 

during installation and servicing. Two or more people 

are required to lift or move this appliance to prevent 

tipping and/or injury.  

•  Connect to a potable water supply only.
•  Do not damage the refrigeration circuit when installing, 

maintaining or servicing the unit.

n

Warning

Follow these electrical requirements during installation of 

this equipment:
•  All field wiring must conform to all applicable codes of 

the authority having jurisdiction. It is the responsibility 

of the end user to provide the disconnect means to 

satisfy local codes. Refer to rating plate for proper 

voltage.

•  This appliance must be grounded.
•  This equipment must be positioned so that the plug is 

accessible unless other means for disconnection from 

the power supply (e.g., circuit breaker or disconnect 

switch) is provided.

•  Check all wiring connections, including factory 

terminals, before operation. Connections can become 

loose during shipment and installation. 

Содержание U65



























Отзывы: