Manitowoc Flav'R-Pic FRP-250, Инструкция по установке, использованию и уходу

Страница: 46 / 52

Maintenance Section 4
4-10
Part Number 020003315 1/11
FRP-250 Graphic Medallion Removal & Installation
The graphic medallions on the FRP-250 are made out of a flexible duratran that can be removed/replaced from the front of the
unit without the use of tools (back-lit merchandiser light box does not need to be removed from the unit).
MEDALLION REMOVAL
1. With Palm of hand slide graphic to the left to expose narrow
seam on right edge.
2. In the newly exposed gap, peel the medallion out toward you
and grasp the right edge of graphic while pulling / flexing it
toward you to release the 3 upper and lower tabs.
3. Continue to pull graphic toward you while slightly moving it to the
right to release the rest of the graphic from the left side of the
merchandiser until the medallion is completely free from the
merchandiser.
MEDALLION INSTALLATION
1. Facing the unit, start slightly off center to the right of the
merchandiser medallion area by holding the graphic medallion
with one hand on each side at about the 9 & 3 o’clock position.
Slide / insert the 3 bottom tabs under the bottom edge of the
merchandiser.
2. With the bottom tabs in place with push down on the top of the
medallion flexing it into a slight “C” shape so the top 3 tabs can
be inserted under the top edge of the merchandiser.
3. With the top tabs in place smooth the medallion out of the “C”
shape and use the palm of you hand to seat the graphic under
the left and right edges.
3
3
2
2
1
1
3
3
2
2
1
1