Manitou 200 ATJ, Руководство оператора

Страница: 81 / 138

2 - 53
M
OVEMENT IN TRANSPORT MODE
/
WORK MODE
Before moving and using the machine, release lock 1 on the turret (see
Fig. A).
The platform has two separate movement modes: transport mode (Fig. D) and
work mode (Fig. E) (direction of movement (Fig. C)).
- Transport mode: The platform arms are in low position, the pendular arm can
be raised to a maximum. This mode is used to move at high speed and go
beyond the slope (See chapter on: CHARACTERISTICS) of the machine
(Fig. D).
- Work mode travail: One or more of the platform arms are raised and / or the
telescope is extended. In this mode, movement takes place at slow speed, with
the slope and overload safety devices activated (Fig. E).
NB : You must use ramp speed (full power with speed
limited to 2 km/h) to cross a steep slope or move over
very bumpy ground. This may be very practical when, for
example, you have to use an access ramp to drive
the platform onto the bed of a truck.
In work mode, all movement on bumpy ground,
unstable land, slopes steeper than the authorized limit (See chapter on:
CHARACTERISTICS), liable to tip or unbalance the
platform are PROHIBITED
During travel in Hare mode, the turret must be in the axis of the platform
Before operating the platform, make sure that the turret is facing the right
way relative to the chassis, i.e. in the direction of travel (black arrow
and white arrow).
On a steep slope:- no load in the basket.
MODE TRANSPORT
D
MODE TRAVAIL
E